Gas boiler is commonly used at present,any gas leakage might produce explode, so for the safety of these places or installation of gas leakage alarm products, to prevent the occurrence of dangerous situation of gas leakage.
How to install gas leak detection alarm in gas boiler room?All are industrial explosion-proof products, and is wall-mounted installation, many factory boiler room master said they do not know how to install, so today we will analyze.
 |   |
Firstly, products are adjusted well from our factory,customers do not need to be set. It is ok to fix the connecting line on the wall directly.
2nd,How much area does this detector cover and how do I know how many I need to install in a boiler room?Don't worry, one detector covers an area of about 25-30 square meters, and is installed near the gas line, other boiler room is not installed in the open area, so you can refer to the installation of several detectors.
3rd,How to install and fix it?The detector can be fixed by finding a few expansion bolts or tapping threads. You can see the product in details, because natural gas is lighter than air, once leakage occurs, it must spread upward
4th,All lines must be strictly threading pipe, for explosion-proof detector is explosion-proof products, controller and detector is connected with the three core signal cable shielding wire, 3*1.5M2, several probe cable things come from inside the host,wiring methond is in our manual
5. The controller is not an explosion-proof product and cannot be installed in the same place as the detector. It is better to install in the duty room or the security room where there are people.
6.After the controller is installed and connected to the power supply, how to test the sensitivity of the detector? It is not recommended to use lighter gas test, but industrial alcohol test to see if it will alarm?Whether to connect external equipment.