Chlorine (Cl₂) is a toxic gas with strong pungent odor, which is harmful to human health and the environment. Inhaling chlorine can irritate the airways, causing coughing and breathing difficulties, and in high concentrations can lead to pulmonary edema and respiratory failure. Long-term exposure to low concentrations of chlorine can trigger chronic respiratory diseases such as bronchitis and asthma. Chlorine itself does not burn, but it can help ignite, and contact with combustible materials may cause fire or explosion. Those who inhale chlorine should move quickly to fresh air, perform artificial respiration or oxygen inhalation if necessary, rinse with plenty of water in case of skin or eye contact and seek medical attention. Chlorine gas has serious harm to human body, environment and equipment. When using chlorine gas, it is necessary to strictly follow the safe operation procedures and equip with protective equipment and testing equipment to ensure safety.
The wall mounted chlorine gas detector is a single toxic and harmful gas detector that can be continuously detected. The instrument is suitable for the essential safety equipment required by the explosion-proof site. The LCD display can directly display the gas concentration and type at the site. The instrument is convenient to operate and has a long standby time. Instrument built-in imported electrochemical sensor, safe and reliable, high precision, anti-interference ability and low power consumption, the use of high-speed CPU processor, so that the instrument detection fast. If in high concentration environment, the instrument also has a self-protection function to avoid poisoning of the instrument built-in sensor in high concentration state.
We also have other model Laboratory chlorine gas leakage alarm, composed of gas alarm controller and gas detector two parts, the controller can be placed in the duty room, mainly to control the monitoring points, gas detector installed in the gas leakage site, the use of electrochemical sensors, long life, high performance. Laboratory chlorine gas leakage alarm device can continuously monitor the concentration of leaking gas and prevent the concentration of toxic and harmful gases from exceeding the preset level after gas leakage. Gas alarm is composed of gas alarm controller and gas detector two parts, gas alarm controller can be placed in the duty room, mainly to control the monitoring points, gas detector installed in the gas most easily leaked location, the core component of the gas detector for the built-in gas sensor, gas sensor to detect the concentration of gas leakage in the air.
The cl2 gas detector converts the monitored gas concentration into an electrical signal and transmits it to the gas control panel through cables. The higher the gas concentration is, the stronger the electrical signal is. When the gas concentration reaches or exceeds the alarm point set by the gas alarm controller, the gas alarm controller sends an alarm signal and starts the external device such as the solenoid valve or shutoff valve and exhaust fan to automatically prevent potential hazards.